CP 390 1L
Plastic primer 1K
CP 390 primer is a one-component, ready-to-use product ideal for priming plastic parts. Its main function is to promote adhesion so that paints and finishes adhere better to the surface. In addition, it has insulating properties, which further enhances its versatility and effectiveness.
It is characterised by its ease of application, making it an ideal choice for professionals and amateurs alike. The drying time of CP 390 primer is short, allowing work to continue quickly without long downtimes.
However, it is worth remembering that the product does not improve adhesion to polyethylene (PE) and Teflon (PTFE), which should be taken into account when planning the work.
Packaging: 1 litre
CP 390 primer is a reliable choice for anyone who needs a robust and effective primer for plastics.
- Product benefits: Short drying time Easy application Efficient Ready to use No sanding required
Specification
SPRAY VISCOSITY
10-12 sek DIN Flow Cup 4mm
RECOMMENDED SIZES FOR PAINT STRAINER
190 μm
PAINT EFFICIENCY
10-12 m2/l
POT LIFE
Product ready for spraying
DRY FILM THICKNESS
1 coat - 10 μm
MINIMUM SHELF LIFE
CP 390: 24 months in originally sealed packaging
Application
SUBSTRATE PREPARATION
The surface should be degreased, abraded (grey non-woven abrasive P1200), degreased again and washed with CP 011 water remover. Before application of CP 390, CP 012 antistatic remover needs to be applied
MIXING RATIO
Ready-to-spray product, does not need to be mixed with hardener or thinner
SPRAY GUN SETTINGS
Nozzle size: 1.2-1.4 mm; Operating pressure: HVLP/RP 1.8-2.0 bar
APPLICATION
1-2 coats. 2-3 min evaporation time between coats
EVAPORATION TIME AFTER APPLICATION
20-30 min after coating at 20°C and 65% relative humidity
TDS PL
Sign up for our newsletter
Get a head start with access to unique information about our latest paint products.
