CP 365 0,8L Black

EXPRESS acrylic primer 2K HS 4:1

CP 365 is a top quality acrylic primer that combines priming and filling qualities to provide an excellent base for further paint work. The black variant, available in a 0.8 L spill, is the ideal choice for precision work where a smaller amount of product is needed.

The greatest advantages of CP 365 are its short drying time at 20°C, good flowability, easy handling and its adhesion to a wide range of substrates, allowing any topcoat to be applied over it. The product can be applied wet-on-wet, which further enhances its versatility. CP 365 in the black variant, thanks to its ability to be mixed on the mixer, is easy to prepare for use and is ideal for demanding projects where precise coverage and a uniform end result are needed.

back to main product

Product benefits: Short drying time Excellent paint flow Easy to process Good adhesion

Compare

more information on this product

Specification

Application

Specification

SHORT DRYING TIME

GOOD PRODUCT FLOW

GOOD ADHESION

WET-ON-WET APPLICATION

SPRAY VISCOSITY

22-30 sec. DIN Flow Cup 4 mm

RECOMMENDED SIZES FOR PAINT STRAINER

190 μm (wet-on-wet 125 μm)

PAINT EFFICIENCY

7-9 m2/l

POT LIFE

1 hrs

DRY FILM THICKNESS

- 1 coat - 50-60 μm
- 2 coats - 100-120 μm

WET SANDING

P800-P1000

DRY SANDING

P400->P500

MINIMUM SHELF LIFE

CP 365: 24 months in originally
sealed packaging
CP 282/ CP 285/ CP 286:
12 months in originally sealed
packaging

VOC

2004/42/WE IIB(c) (540) 540

Application

SUBSTRATE PREPARATION

Abrade the substrate, using appropriate
grade of abrasive. Once abrade, clean the
substrate with silicone remover CP 015.
After the substrate is clean and dry, apply
the required coats of CP 365 taking note of
evaporation time between layers

MIXING RATIO

4:1
100 parts of CP 365
25 parts of hardener CP 282/ CP 285/ CP 286
15-20 % of thinner CP 040/ CP 070/ CP 055/
CP 075
Wet-on-wet method
30-40 % of the thinner CP 040/ CP 070/
CP 055/ CP 075

SPRAY GUN SETTINGS

Nozzle size: 1.6-1.8 mm;
Operating pressure: 1.8-2.0 bar
Wet-on-wet method: nozzle size
1.2-1.4 mm, HVLP/RP
Operating pressure 1.8-2.0 bar

APPLICATION

2 full coats

EVAPORATION TIME AFTER APPLICATION

5 min after coating at 20°C and
65% relative humidity

DRYING

Drying times at 20°C and
65% relative humidity:
- dust dryness: 10 min (2 coats)
- before sanding: 2 hrs
Drying times at 60°C and
65% relative humidity:
- before sanding 30 min