CP 370 DTM 3,5L

Direct to metal converter of acrylic mixing systems

The 3.5L CP 370 DTM pack is the ideal solution for larger industrial projects where an economical and efficient approach to paint application is required. Used in conjunction with Profix acrylic varnishes, this additive allows the varnish mix to be applied directly to unprimed metal surfaces, providing exceptional corrosion protection.
The combination of the Acryl / LV Cryl system with CP 370 DTM creates a durable, corrosion-resistant coating with excellent adhesion. The product can be applied in one or two coats on steel, aluminium and galvanised steel surfaces. Thanks to its high mechanical resistance, CP 370 DTM in a 3.5L pack is the ideal choice for industrial applications, guaranteeing long-lasting protection and a professional finish.

back to main product

Product benefits: Smooth surface Easy application High paint efficiency Uniform surface Various degrees of satin effect

Compare

more information on this product

Specification

Application

Specification

HIGH RESISTANCE

UNIFORM SURFACE

EASY APPLICATION

RECOMMENDED SIZES FOR PAINT STRAINER

125-190 μm

PAINT EFFICIENCY

~7-9 m2/L

POT LIFE

1.5 hrs

DRY FILM THICKNESS

1 coat ~30 μm

MINIMUM SHELF LIFE

CP 370: 24 months in originally
sealed packaging
CP 282/ CP 285/ CP 286:
12 months in originally sealed
packaging

Application

SUBSTRATE PREPARATION

The surface is degreased with CP 015.
The primer is then applied to the surface
sanded with P320-P400 abrasives.
Can be applied directly to bare metal
surfaces

MIXING RATIO

Preparation of ACRYL with CP 370
Semi-satin surface
70 parts parts of ACRYL
30 parts parts of CP 370
Satin surface
50 parts parts of ACRYL
50 parts parts of CP 370
Ready-to-spray mixture
100 parts parts of ACRYL+CP 370 mixture
25 parts parts of hardener CP 285
Alternative hardeners CP 282 (fast) < 15°C
CP 286 (slow) > 25°C
15-25 parts by vol. of thinner
CP 040/ 070/ 075

SPRAY GUN SETTINGS

Nozzle size: 1.4-1.6 mm;
Operating pressure: HVLP/RP 1.8-2.0 bar

APPLICATION

2 full coats allowing flash-off
between coats

EVAPORATION TIME AFTER APPLICATION

5-10 min after coating at
20°C and 65% relative humidity

DRYING

Drying times at 20°C and
65% relative humidity:
- dust dryness: 10 min
- for assembly: 5 hrs
- thoroughly: 10 hrs
Drying times at 60°C and
65% relative humidity:
- for assembly: 30 min