CP 390 0,5L
Plastic primer 1K
Primer CP 390 is a one-component product, ready for immediate use, specially developed for priming plastic parts. Thanks to its unique properties, it acts as an adhesion promoter and also has an insulating function, which improves the adhesion of paints and finishes to the surface.
This primer is extremely easy to apply, making it an excellent choice for professionals and DIY enthusiasts alike. The short drying time of the CP 390 primer allows you to quickly move on to the next work steps without unnecessary delays.
It should be noted that CP 390 primer does not increase adhesion on polyethylene (PE) and Teflon (PTFE) surfaces, which should be taken into account when planning the work.
Packaging: 0.5 litres
CP 390 primer is a reliable choice for anyone looking for an effective and robust solution for priming plastics.
- Product benefits: Short drying time Easy application Efficient Ready to use No sanding required
Specification
SPRAY VISCOSITY
10-12 sek DIN Flow Cup 4mm
RECOMMENDED SIZES FOR PAINT STRAINER
190 μm
PAINT EFFICIENCY
10-12 m2/l
POT LIFE
Product ready for spraying
DRY FILM THICKNESS
1 coat - 10 μm
MINIMUM SHELF LIFE
CP 390: 24 months in originally sealed packaging
Application
SUBSTRATE PREPARATION
The surface should be degreased, abraded (grey non-woven abrasive P1200), degreased again and washed with CP 011 water remover. Before application of CP 390, CP 012 antistatic remover needs to be applied
MIXING RATIO
Ready-to-spray product, does not need to be mixed with hardener or thinner
SPRAY GUN SETTINGS
Nozzle size: 1.2-1.4 mm; Operating pressure: HVLP/RP 1.8-2.0 bar
APPLICATION
1-2 coats. 2-3 min evaporation time between coats
EVAPORATION TIME AFTER APPLICATION
20-30 min after coating at 20°C and 65% relative humidity
TDS PL
Sign up for our newsletter
Get a head start with access to unique information about our latest paint products.
